The advantages of Clirik high-pressure micro powder mill

 

High pressure micro powder mill machine main applies to grinding and crushing general materials, such as kaolin, limestone, calcite, talc, marble, barite, gypsum, iron oxide red, iron oxide green, hydrogen oxidation aluminum, pigments, expansion run soil, clay, carbon black, coal, and activated carbon, humidity is less than 8%, Mo's hardness below 6 level following of non-flammable and non-explosion materials.
High pressure micro-powder grinder compared to other types of mills, has six major advantages:
1.         High pressure micro-powder grinder has wide scope compared with pneumatic mill.
2.         High pressure micro-powder grinder compared to other mill, the roller to the material roller compaction pressure under the function of high-pressure spring to improve 800---1200Kg.
3.         In the case of the same yield and fineness, its system energy consumption is only one-third of airflow mill.
4.         In the same yield and fineness, the prices are lower than the airflow mill.
5.         Micro-powder grinding mill compared with airflow mill, airflow mill must firstly crush 20mm material to 5mm then process into superfine powder. But high pressure micro powder mill can directly feed 20mm material, which can achieve an average size <6.5 Mu m~12.5 Mu m of ultra-fine powder.
6.         Grinding device using overlapped multistage sealing, good sealing performance.
7.         High pressure micro powder mill dedusting fully meet national dust emissions standards.
High pressure micro-powder grinder learn from Japan, and Germany advanced technology of size grading and adopt the principles of fluid mechanics, comparable to its innovative design can be used with airflow mill, thus successfully resolved the high cost of domestic airflow mill, is a high-efficiency micro powder grinding mill.
Clirik Company © 2000-2010 All rights reserved. E-mail: sales@clirik.com Tel:0086-21-20236178 沪ICP备09056488号-1 About Us | Products | News | Email |